commit 339e79f5caecfb1bbd137b3e887b2098a5812279
parent 244c1d8c6b9184b1103296b927592dfe7ece7b1a
Author: parazyd <parazyd@dyne.org>
Date: Mon, 25 Sep 2017 12:47:06 +0200
update dependencies, readme, submodules
Diffstat:
4 files changed, 8 insertions(+), 1309 deletions(-)
diff --git a/README.md b/README.md
@@ -8,18 +8,19 @@ support multiple Linux distributions.
## Requirements
arm-sdk is designed to be used interactively from a terminal, as well as
-from shell scripts. It requires the following packages to be installed:
+from shell scripts. It requires the following packages to be installed, as well
+as [libdevuansdk dependencies](https://github.com/dyne/libdevuansdk/blob/master/README.md#requirements):
### Devuan
```
-sudo git-core zsh curl wget debootstrap cgpt xz-utils kpartx parted qemu-user-static build-essential rsync gcc-arm-none-eabi gcc-multilib lib32z1 u-boot-tools device-tree-compiler lzop dosfstools vboot-utils vboot-kernel-utils lzop
+curl wget qemu-user-static build-essential rsync gcc-arm-none-eabi gcc-multilib lib32z1 u-boot-tools device-tree-compiler lzop dosfstools vboot-utils vboot-kernel-utils
```
### Gentoo
```
-app-admin/sudo dev-vcs/git app-shells/zsh net-misc/curl net-misc/wget dev-util/debootstrap sys-boot/vboot-utils app-arch/xz-utils sys-block/parted app-emulation/qemu(static-user) net-misc/rsync sys-libs/zlib dev-embedded/u-boot-tools sys-apps/dtc app-arch/lzop sys-fs/dosfstools
+net-misc/curl net-misc/wget sys-boot/vboot-utils app-emulation/qemu(static-user) net-misc/rsync sys-libs/zlib dev-embedded/u-boot-tools sys-apps/dtc app-arch/lzop sys-fs/dosfstools
```
`sudo` permissions are required for the user that is running the build.
@@ -61,22 +62,20 @@ Now is the time you choose the device and OS you want to build the image for.
### Currently supported boards
-* `bananapi` - Banana Pi
-* `bananapro` - Banana Pi Pro
* `beagleboneblack` - BeagleBone Black
* `chromeacer` - Acer ARM Chromebook
* `chromeveyron` - Veyron ARM Chromebook (RK3288)
-* `cubieboard2` - Cubieboard 2
-* `cubietruck` - Cubietruck
* `n900` - Nokia N900
* `odroidxu` - ODROID-XU
+* `odroidxu4` - ODROID-XU4
* `ouya` - OUYA gaming console
* `raspi1` - Raspberry Pi 1 and 0 (armel)
* `raspi2` - Raspberry Pi 2 and 3
* `raspi3` - Raspberry Pi 3 (64bit)
+* `sunxi` - Allwinner-based boards
```
-; load devuan cubietruck
+; load devuan sunxi
```
Once initialized, you can run the helper command:
diff --git a/extra/m2plus/bananapim2plus.fex b/extra/m2plus/bananapim2plus.fex
@@ -1,1283 +0,0 @@
-;H3 dolphin-p1 board application
-;H3 dolphin-p1 board application
-;---------------------------------------------------------------------------------------------------------
-; 说明： 脚本中的字符串区分大小写，用户可以修改"="后面的数值，但是不要修改前面的字符串
-; 描述gpio的形式：Port:端口+组内序号<功能分配><内部电阻状态><驱动能力><输出电平状态>
-;---------------------------------------------------------------------------------------------------------
-
-[product]
-version = "100"
-machine = "Banana Pi BPI-M2-Plus"
-
-;---------------------------------------------------------------------------------------------------------
-; eraseflag - 1 erase data partition, 0 - do not erase data partition
-; next_work - action after burn, 0x0 by config, 0x1, normal, 0x2 reboot 0x3 ,shutdown,0x4 reupdate ,0x5 boot
-;---------------------------------------------------------------------------------------------------------
-[platform]
-debug_mode = 1
-eraseflag = 1
-next_work = 2
-
-;----------------------------------------------------------------------------------
-;[target] system bootup configuration
-;boot_clock = CPU boot frequency, Unit: MHz
-;storage_type = boot medium, 0-nand, 1-card0, 2-card2, -1(defualt)auto scan
-;----------------------------------------------------------------------------------
-[target]
-boot_clock = 1008
-storage_type = -1
-
-;---------------------------------------------------------------------------------
-; uboot key detect enable
-; 当keyen_flag = 1 时，支持按键检测
-; 当keyen_flag = 0 时，不支持
-;---------------------------------------------------------------------------------
-[key_detect_en]
-keyen_flag = 0
-
-;---------------------------------------------------------------------------------
-;"一键进烧写功能"的按键值配置，按住位于min~max范围内的按键都可以强制进烧写
-; fel_key_max用于配置按键的最大键值
-; fel_key_min用于配置按键的最小键值
-;---------------------------------------------------------------------------------
-[fel_key]
-fel_key_max =07
-fel_key_min =02
-
-;----------------------------------------------------------------------------------
-;card boot
-;logical_start用于配置启动卡上mbr的位置相对于SD卡sector 0的偏移，单位为sector(512byte)
-;sprite_gpio0用于配置卡量产时指示灯所用的gpio
-;----------------------------------------------------------------------------------
-;-------------------------------------------------------------------------------
-; sprite_work_delay :
-; sprite_err_delay :
-; sprite_gpio0 ： 卡量产、一键recovery状态指示灯
-; next_work ： 卡量产完成，工作状态(默认关机)
-;-------------------------------------------------------------------------------
-[card_boot]
-logical_start = 40960
-sprite_work_delay = 500
-sprite_err_delay = 200
-sprite_gpio0 = port:PL10<1><default><default><default>
-next_work = 3
-
-;---------------------------------------------------------------------------------
-; used : 1: used this config, 0: not
-; start_type : 1: start system directly when power supply, 0: wait IR/KEY to power on
-; irkey_used : 1: ir key used, 0: not
-; pmukey_used: 1: physical button used, 0: not
-; pmukey_num : the index of gpio, only support PL
-; led_power : 1: light, 0: off, the control gpio is PL10
-; led_state : 1: light, 0: off, default is 0
-;---------------------------------------------------------------------------------
-[box_start_os]
-used = 1
-start_type = 1
-irkey_used = 1
-pmukey_used = 1
-pmukey_num = 3
-led_power = 0
-led_state = 0
-
-;-------------------------------------------------------------------------------
-; boot阶段上电初始化GPIO
-; used :模块使能端 置1：开启模块 置0：关闭模块
-; gpiox ：上电初始化gpio （名称自定，但不能重复，并且GPIO允许可以多个）
-; PH06 : 系统显示LED GPIO
-;-------------------------------------------------------------------------------
-[boot_init_gpio]
-used = 1
-gpio0 = port:PL10<1><default><default><1>
-gpio1 = port:PA15<1><default><default><1>
-
-;----------------------------------------------------------------------------------
-; used: 模块使能端 1：开启模块 0：关闭模块
-; mode: 模式选择 1：一键进入OTA升级 2：一键恢复（通过sysrecovery分区来恢复） 其他值：无效
-; recovery_key ： 按键配置 （例如：recovery_key= port:PH16<0><default>）
-;----------------------------------------------------------------------------------
-[recovery_para]
-used = 1
-mode = 2
-recovery_key = port:PL01<0><default><default><default>
-
-
-;---------------------------------------------------------------------------------------------------------
-; if 1 == standby_mode, then support super standby;
-; else, support normal standby.
-;---------------------------------------------------------------------------------------------------------
-[pm_para]
-standby_mode = 1
-
-[card0_boot_para]
-card_ctrl = 0
-card_high_speed = 1
-card_line = 4
-sdc_d1 = port:PF00<2><1><2><default>
-sdc_d0 = port:PF01<2><1><2><default>
-sdc_clk = port:PF02<2><1><2><default>
-sdc_cmd = port:PF03<2><1><2><default>
-sdc_d3 = port:PF04<2><1><2><default>
-sdc_d2 = port:PF05<2><1><2><default>
-
-[card2_boot_para]
-card_ctrl = 2
-card_high_speed = 1
-card_line = 8
-sdc_cmd = port:PC06<3><1><2><default>
-sdc_clk = port:PC05<3><1><2><default>
-sdc_d0 = port:PC08<3><1><2><default>
-sdc_d1 = port:PC09<3><1><2><default>
-sdc_d2 = port:PC10<3><1><2><default>
-sdc_d3 = port:PC11<3><1><2><default>
-sdc_d4 = port:PC12<3><1><2><default>
-sdc_d5 = port:PC13<3><1><2><default>
-sdc_d6 = port:PC14<3><1><2><default>
-sdc_d7 = port:PC15<3><1><2><default>
-sdc_2xmode = 1
-sdc_ddrmode = 1
-
-[twi_para]
-twi_port = 0
-twi_scl = port:PA11<2><default><default><default>
-twi_sda = port:PA12<2><default><default><default>
-
-[uart_para]
-uart_debug_port = 0
-uart_debug_tx = port:PA04<2><1><default><default>
-uart_debug_rx = port:PA05<2><1><default><default>
-
-[force_uart_para]
-force_uart_port = 0
-force_uart_tx = port:PF02<3><1><default><default>
-force_uart_rx = port:PF04<3><1><default><default>
-
-[jtag_para]
-jtag_enable = 0
-jtag_ms = port:PA00<3><default><default><default>
-jtag_ck = port:PA01<3><default><default><default>
-jtag_do = port:PA02<3><default><default><default>
-jtag_di = port:PA03<3><default><default><default>
-
-[clock]
-pll_video = 297
-pll_ve = 402
-pll_periph0 = 600
-pll_gpu = 576
-pll_periph1 = 600
-pll_de = 864
-
-;*****************************************************************************
-;sdram configuration
-;
-; dram_tpr7[31:31]=1, use gpio type to detect dram type and
-; dram_tpr7[31:31]=0, not use gpio type to detect dram type.
-;
-; if set ddr type auto detect, use dram_tpr7 to set dram clk.
-; for example: if dram_tpr13[13:13] = 1, it use
-; dram_tpr7[29:20] to set lpddr2 clk,
-; dram_tpr7[19:10] to set lpddr3 clk,
-; dram_tpr7[9:0] to set ddr3 or ddr3l clk.
-;*****************************************************************************
-[dram_para]
-dram_clk = 624
-dram_type = 3
-dram_zq = 0x3b3bfb
-dram_odt_en = 0x1
-dram_para1 = 0x10E40000
-dram_para2 = 0x0000
-dram_mr0 = 0x1840
-dram_mr1 = 0x40
-dram_mr2 = 0x18
-dram_mr3 = 0x2
-dram_tpr0 = 0x0048A192
-dram_tpr1 = 0x01C2418D
-dram_tpr2 = 0x00076051
-dram_tpr3 = 0
-dram_tpr4 = 0
-dram_tpr5 = 0
-dram_tpr6 = 100
-dram_tpr7 = 0
-dram_tpr8 = 0
-dram_tpr9 = 0
-dram_tpr10 = 0
-dram_tpr11 = 0x6aaa0000
-dram_tpr12 = 0x7979
-dram_tpr13 = 0x800800
-;----------------------------------------------------------------------------------
-;os life cycle para configuration
-;----------------------------------------------------------------------------------
-
-;---------------------------------------------------------------------------------------------------------
-; wakeup_src_para:
-; sometimes, u would like to add more wakeup src in standby mode, these para will be
-; help;
-; u need to make sure the standby mode support the wakeup src. Also, some hw
-; condition must be guaranteed.
-; including:
-; cpu_en: power on or off.
-; 1: mean power on
-; 0: mean power off
-; cpu_freq: indicating lowest freq. unit is Mhz;
-; dram selfresh_en: selfresh or not.
-; 1: enable enter selfresh
-; 0: disable enter selfresh
-; dram_pll: if not enter selfresh, indicating lowest freq. unit is Mhz;
-; wakeup_src: to make the scenario work, the wakeup src is needed.
-;---------------------------------------------------------------------------------------------------------
-[wakeup_src_para]
-cpu_en = 0
-cpu_freq = 48
-; (cpu:apb:ahb)
-pll_ratio = 0x111
-dram_selfresh_en = 1
-dram_freq = 36
-wakeup_src0 =
-wakeup_src_wl = port:PG10<4><default><default><0>
-wakeup_src_bt = port:PL03<6><default><default><0>
-
-;----------------------------------------------------------------------------------
-;i2c configuration
-;----------------------------------------------------------------------------------
-[twi0]
-twi_used = 1
-twi_scl = port:PA11<2><default><default><default>
-twi_sda = port:PA12<2><default><default><default>
-
-[twi1]
-twi_used = 1
-twi_scl = port:PA18<3><default><default><default>
-twi_sda = port:PA19<3><default><default><default>
-
-[twi2]
-twi_used = 0
-twi_scl = port:PE12<3><default><default><default>
-twi_sda = port:PE13<3><default><default><default>
-
-;----------------------------------------------------------------------------------
-;uart configuration
-;uart_type --- 2 (2 wire), 4 (4 wire), 8 (8 wire, full function)
-;----------------------------------------------------------------------------------
-[uart0]
-uart_used = 1
-uart_port = 0
-uart_type = 2
-uart_tx = port:PA04<2><1><default><default>
-uart_rx = port:PA05<2><1><default><default>
-
-[uart1]
-uart_used = 1
-uart_port = 1
-uart_type = 4
-uart_tx = port:PG06<2><1><default><default>
-uart_rx = port:PG07<2><1><default><default>
-uart_rts = port:PG08<2><1><default><default>
-uart_cts = port:PG09<2><1><default><default>
-
-[uart2]
-uart_used = 1
-uart_port = 2
-uart_type = 4
-uart_tx = port:PA00<2><1><default><default>
-uart_rx = port:PA01<2><1><default><default>
-uart_rts = port:PA02<2><1><default><default>
-uart_cts = port:PA03<2><1><default><default>
-
-[uart3]
-uart_used = 1
-uart_port = 3
-uart_type = 2
-uart_tx = port:PA13<3><1><default><default>
-uart_rx = port:PA14<3><1><default><default>
-uart_rts = port:PA15<3><1><default><default>
-uart_cts = port:PA16<3><1><default><default>
-
-;----------------------------------------------------------------------------------
-;SPI controller configuration
-;----------------------------------------------------------------------------------
-[spi0]
-spi_used = 1
-spi_cs_bitmap = 1
-spi_mosi = port:PC00<3><default><default><default>
-spi_miso = port:PC01<3><default><default><default>
-spi_sclk = port:PC02<3><default><default><default>
-spi_cs0 = port:PC03<3><1><default><default>
-
-[spi1]
-spi_used = 0
-spi_cs_bitmap = 1
-spi_cs0 = port:PA13<2><1><default><default>
-spi_sclk = port:PA14<2><default><default><default>
-spi_mosi = port:PA15<2><default><default><default>
-spi_miso = port:PA16<2><default><default><default>
-
-;----------------------------------------------------------------------------------
-;SPI device configuration
-;----------------------------------------------------------------------------------
-[spi_devices]
-spi_dev_num = 1
-
-[spi_board0]
-modalias = "spidev"
-max_speed_hz = 33000000
-bus_num = 0
-chip_select = 0
-mode = 0
-full_duplex = 1
-manual_cs = 0
-
-; NOTE: This section is necessary only for "gpio_sunxi" driver
-; which is obsolete for H3 boards
-[gpio_para]
-gpio_used = 0
-gpio_num = 0
-
-[leds_para]
-leds_used = 1
-red_led = port:PL10<1><default><default><1>
-red_led_active_low = 0
-
-;----------------------------------------------------------------------------------
-;thermal configuration
-;ths_trip_count : temperature trigger number
-;ths_trip_0 : first temperature trigger
-;ths_trip_1 : second temperature trigger
-;ths_trip_2 : third temperature trigger, when upto this temperature, system shutdown
-;ths_trip_0_min : first temperature trigger's min freq
-;ths_trip_0_max : first temperature trigger's max freq
-;ths_trip_1_min : second temperature trigger's min freq
-;ths_trip_1_max : second temperature trigger's max freq
-;----------------------------------------------------------------------------------
-
-[ths_para]
-ths_used = 1
-ths_trip1_count = 8
-ths_trip1_0 = 65
-ths_trip1_1 = 70
-ths_trip1_2 = 75
-ths_trip1_3 = 80
-ths_trip1_4 = 85
-ths_trip1_5 = 90
-ths_trip1_6 = 95
-ths_trip1_7 = 105
-ths_trip1_0_min = 0
-ths_trip1_0_max = 1
-ths_trip1_1_min = 1
-ths_trip1_1_max = 2
-ths_trip1_2_min = 2
-ths_trip1_2_max = 3
-ths_trip1_3_min = 3
-ths_trip1_3_max = 4
-ths_trip1_4_min = 4
-ths_trip1_4_max = 6
-ths_trip1_5_min = 6
-ths_trip1_5_max = 8
-ths_trip1_6_min = 8
-ths_trip1_6_max = 10
-ths_trip1_7_min = 0
-ths_trip1_7_max = 0
-ths_trip2_count = 1
-ths_trip2_0 = 105
-
-;----------------------------------------------------------------------------------
-;cooler_table cooler_count <=32
-;----------------------------------------------------------------------------------
-
-[cooler_table]
-cooler_count = 11
-cooler0 = "1200000 4 4294967295 0"
-cooler1 = "1008000 4 4294967295 0"
-cooler2 = "816000 4 4294967295 0"
-cooler3 = "720000 4 4294967295 0"
-cooler4 = "648000 4 4294967295 0"
-cooler5 = "480000 4 4294967295 0"
-cooler6 = "312000 4 4294967295 0"
-cooler7 = "240000 4 4294967295 0"
-cooler8 = "240000 3 4294967295 0"
-cooler9 = "240000 2 4294967295 0"
-cooler10 = "240000 1 4294967295 0"
-
-[nand0_para]
-nand_support_2ch = 0
-
-nand0_used = 0
-nand0_we = port:PC00<2><default><default><default>
-nand0_ale = port:PC01<2><default><default><default>
-nand0_cle = port:PC02<2><default><default><default>
-nand0_ce1 = port:PC03<2><default><default><default>
-nand0_ce0 = port:PC04<2><default><default><default>
-nand0_nre = port:PC05<2><default><default><default>
-nand0_rb0 = port:PC06<2><default><default><default>
-nand0_rb1 = port:PC07<2><default><default><default>
-nand0_d0 = port:PC08<2><default><default><default>
-nand0_d1 = port:PC09<2><default><default><default>
-nand0_d2 = port:PC10<2><default><default><default>
-nand0_d3 = port:PC11<2><default><default><default>
-nand0_d4 = port:PC12<2><default><default><default>
-nand0_d5 = port:PC13<2><default><default><default>
-nand0_d6 = port:PC14<2><default><default><default>
-nand0_d7 = port:PC15<2><default><default><default>
-nand0_ndqs = port:PC16<2><default><default><default>
-
-
-;-----------------------------------------------------------------
-;auto_hpd - 1:need hotplud for hdmi/tv; 0:don't hotplud for lcd
-;output_type - 0:none; 1:lcd; 2:tv; 4:hdmi; 8:vga (as default config in homlet)
-;hdmi_channel- the display channel for hdmi (as default config in homlet)
-;cvbs_channel- the display channel for cvbs (as default config in homlet)
-;hdmi_mode - as default config for output of hdmi in homlet
-;cvbs_mode - as default config for output of tv in homlet. 11:PAL; 14:NTSC
-;check the definition(of hdmi/cvbs_mode) of disp_tv_mode in sunxi_display2.h
-;hdmi_mode_check - disable/enable the function of checking hdmi mode, 0 is disable, 1 is enable
-;-----------------------------------------------------------------
-[boot_disp]
-advert_disp = 0
-auto_hpd = 1
-output_type = 4
-hdmi_channel = 0
-hdmi_mode = 4
-cvbs_channel = 1
-cvbs_mode = 11
-output_full = 1
-hdmi_mode_check = 1
-
-;----------------------------------------------------------------------------------
-;disp init configuration
-;
-;disp_mode (0:screen0<screen0,fb0>; 1:screen1<screen1,fb0>)
-;screenx_output_type (0:none; 1:lcd; 3:hdmi;)
-;screenx_output_mode (used for hdmi output, 0:480i 1:576i 2:480p 3:576p 4:720p50)
-; (5:720p60 6:1080i50 7:1080i60 8:1080p24 9:1080p50 10:1080p60)
-;fbx format (0:ARGB 1:ABGR 2:RGBA 3:BGRA 5:RGB565 8:RGB888 12:ARGB4444 16:ARGB1555 18:RGBA5551)
-;fbx_width,fbx_height (framebuffer horizontal/vertical pixels, fix to output resolution while equal 0)
-;lcdx_backlight (lcd init backlight,the range:[0,256],default:197
-;----------------------------------------------------------------------------------
-[disp_init]
-disp_init_enable = 1
-disp_mode = 0
-
-screen0_output_type = 3
-screen0_output_mode = 5
-
-screen1_output_type = 3
-screen1_output_mode = 5
-
-fb0_format = 0
-fb0_width = 0
-fb0_height = 0
-
-fb1_format = 0
-fb1_width = 0
-fb1_height = 0
-
-fb0_framebuffer_num = 3
-sunxi_fb_mem_reserve = 32
-
-;----------------------------------------------------------------------------------
-;hdmi configuration
-;----------------------------------------------------------------------------------
-[hdmi_para]
-hdmi_used = 1
-hdmi_power = "vcc-hdmi-18"
-;-------------------------------------
-; set to 0 for hdmi->dvi compatibility
-;-------------------------------------
-;hdcp_enable = 0
-;hdmi_cts_compatibility = 1
-
-[tv_para]
-tv_used = 0
-tv_dac_used = 1
-tv_dac_src0 = 0
-
-;----------------------------------------------------------------------------------
-;pwm config
-;----------------------------------------------------------------------------------
-[pwm0_para]
-pwm_used = 0
-pwm_positive = port:PA05<3><0><default><default>
-
-;------------------------------------------------------------------------------;
-; 10/100/100Mbps Ethernet MAC Controller Configure ;
-;------------------------------------------------------------------------------;
-; Options: ;
-; gmac_used --- 0: not used, 1: external phy, 2: internal phy ;
-; gmac_powerx -- A[:B] A: axp channel, B: voltage value ;
-; If set gamc_phy to use internal PHY, do not config port ;
-;------------------------------------------------------------------------------;
-; MII RMII MII RMII MII RMII ;
-; PD00 * PD06 * * PD12 * * ;
-; PD01 * PD07 * PD13 * * ;
-; PD02 * * PD08 * PD14 * ;
-; PD03 * * PD09 * * PD15 * ;
-; PD04 * PD10 * * PD16 * * ;
-; PD05 * PD11 * * PD17 * * ;
-;------------------------------------------------------------------------------;
-[gmac0]
-gmac_used = 1
-gmac_rxd3 = port:PD00<2><default><3><default>
-gmac_rxd2 = port:PD01<2><default><3><default>
-gmac_rxd1 = port:PD02<2><default><3><default>
-gmac_rxd0 = port:PD03<2><default><3><default>
-gmac_rxclk = port:PD04<2><default><3><default>
-gmac_rxdv = port:PD05<2><default><3><default>
-;gmac_rxerr = port:PD06<2><default><3><default>
-gmac_txd3 = port:PD07<2><default><3><default>
-gmac_txd2 = port:PD08<2><default><3><default>
-gmac_txd1 = port:PD09<2><default><3><default>
-gmac_txd0 = port:PD10<2><default><3><default>
-;gmac_crs = port:PD11<2><default><3><default>
-gmac_txclk = port:PD12<2><default><3><default>
-gmac_txen = port:PD13<2><default><3><default>
-;gmac_txerr = port:PD14<2><default><3><default>
-gmac_col = port:PD15<2><default><3><default>
-gmac_mdc = port:PD16<2><default><3><default>
-gmac_mdio = port:PD17<2><default><3><default>
-gmac_power1 =
-
-[gmac_phy_power]
-gmac_phy_power_en = port:PD06<1><default><default><0>
-
-;--------------------------------------------------------------------------------
-;vip (video input port) configuration
-;vip_used: 0:disable 1:enable
-;vip_mode: 0:sample one interface to one buffer 1:sample two interface to one buffer
-;vip_dev_qty: The quantity of devices linked to capture bus
-;
-;vip_define_sensor_list: If you want use sensor detect function, please set vip_define_sensor_list = 1, and
-; verify that file /system/etc/hawkview/sensor_list_cfg.ini is properly configured!
-;
-;vip_dev(x)_pos: sensor position, "rear" or "front", if vip_define_sensor_list = 1,
-;vip_dev(x)_pos must be configured!
-;
-;vip_dev(x)_isp_used 0:not use isp 1:use isp
-;vip_dev(x)_fmt: 0:yuv 1:bayer raw rgb
-;vip_dev(x)_stby_mode: 0:not shut down power at standby 1:shut down power at standby
-;vip_dev(x)_vflip: flip in vertical direction 0:disable 1:enable
-;vip_dev(x)_hflip: flip in horizontal direction 0:disable 1:enable
-;vip_dev(x)_iovdd: camera module io power handle string, pmu power supply
-;vip_dev(x)_iovdd_vol: camera module io power voltage, pmu power supply
-;vip_dev(x)_avdd: camera module analog power handle string, pmu power supply
-;vip_dev(x)_avdd_vol: camera module analog power voltage, pmu power supply
-;vip_dev(x)_dvdd: camera module core power handle string, pmu power supply
-;vip_dev(x)_dvdd_vol: camera module core power voltage, pmu power supply
-;vip_dev(x)_afvdd: camera module vcm power handle string, pmu power supply
-;vip_dev(x)_afvdd_vol: camera module vcm power voltage, pmu power supply
-;x indicates the index of the devices which are linked to the same capture bus
-;fill voltage in uV, e.g. iovdd = 2.8V, vip_devx_iovdd_vol = 2800000
-;fill handle string as below:
-;axp22_eldo3
-;axp22_dldo4
-;axp22_eldo2
-;fill handle string "" when not using any pmu power supply
-;--------------------------------------------------------------------------------
-
-[csi0]
-
-vip_used = 1
-vip_mode = 0
-vip_dev_qty = 1
-vip_define_sensor_list = 0
-
-vip_csi_pck = port:PE00<2><default><default><default>
-vip_csi_mck = port:PE01<2><default><default><default>
-vip_csi_hsync = port:PE02<2><default><default><default>
-vip_csi_vsync = port:PE03<2><default><default><default>
-vip_csi_d0 = port:PE04<2><default><default><default>
-vip_csi_d1 = port:PE05<2><default><default><default>
-vip_csi_d2 = port:PE06<2><default><default><default>
-vip_csi_d3 = port:PE07<2><default><default><default>
-vip_csi_d4 = port:PE08<2><default><default><default>
-vip_csi_d5 = port:PE09<2><default><default><default>
-vip_csi_d6 = port:PE10<2><default><default><default>
-vip_csi_d7 = port:PE11<2><default><default><default>
-vip_csi_sck = port:PE12<2><default><default><default>
-vip_csi_sda = port:PE13<2><default><default><default>
-
-vip_dev0_mname = "ov5640"
-vip_dev0_pos = "rear"
-vip_dev0_lane = 4
-vip_dev0_twi_id = 2
-vip_dev0_twi_addr = 0x78
-vip_dev0_isp_used = 1
-vip_dev0_fmt = 1
-vip_dev0_stby_mode = 1
-vip_dev0_vflip = 0
-vip_dev0_hflip = 0
-vip_dev0_iovdd = ""
-vip_dev0_iovdd_vol = 2800000
-vip_dev0_avdd = ""
-vip_dev0_avdd_vol = 2800000
-vip_dev0_dvdd = ""
-vip_dev0_dvdd_vol = 1500000
-vip_dev0_afvdd = ""
-vip_dev0_afvdd_vol = 2800000
-vip_dev0_power_en = port:PD14<1><default><default><default>
-vip_dev0_reset = port:PE14<1><default><default><default>
-vip_dev0_pwdn = port:PE15<1><default><default><default>
-vip_dev0_flash_en =
-vip_dev0_flash_mode =
-vip_dev0_af_pwdn =
-
-vip_dev0_act_used = 0
-vip_dev0_act_name = "ad5820_act"
-vip_dev0_act_slave = 0x18
-
-
-vip_dev1_mname = ""
-vip_dev1_pos = "front"
-vip_dev1_lane = 1
-vip_dev1_twi_id = 0
-vip_dev1_twi_addr =
-vip_dev1_isp_used = 0
-vip_dev1_fmt = 1
-vip_dev1_stby_mode = 0
-vip_dev1_vflip = 0
-vip_dev1_hflip = 0
-vip_dev1_iovdd = ""
-vip_dev1_iovdd_vol = 2800000
-vip_dev1_avdd = ""
-vip_dev1_avdd_vol = 2800000
-vip_dev1_dvdd = ""
-vip_dev1_dvdd_vol = 1500000
-vip_dev1_afvdd = ""
-vip_dev1_afvdd_vol = 2800000
-vip_dev1_power_en =
-vip_dev1_reset =
-vip_dev1_pwdn =
-vip_dev1_flash_en =
-vip_dev1_flash_mode =
-vip_dev1_af_pwdn =
-
-
-;--------------------------------------------------------------------------------
-;tv configuration
-;
-;--------------------------------------------------------------------------------
-[tvout_para]
-tvout_used = 0
-tvout_channel_num =
-tv_en = 0
-
-[tvin_para]
-tvin_used = 0
-tvin_channel_num =
-
-;----------------------------------------------------------------------------------
-;DE-Interlace configuration
-;----------------------------------------------------------------------------------
-[di_para]
-di_used = 1
-
-;--------------------------------------------------------------------------------
-; SDMMC PINS MAPPING |
-; ------------------------------------------------------------------------------|
-; Config Guide |
-; sdc_used: 1-enable card, 0-disable card |
-; sdc_detmode: card detect mode |
-; 1-detect card by gpio polling |
-; 2-detect card by gpio irq(must use IO with irq function) |
-; 3-no detect, always in for boot card |
-; 4-manually insert and remove by /proc/driver/sunxi-mmc.x/insert|
-; sdc_buswidth: card bus width, 1-1bit, 4-4bit, 8-8bit |
-; sdc_use_wp: 1-with write protect IO, 0-no write protect IO |
-; sdc_isio: for sdio card |
-; sdc_regulator: power control.if card supports UHS-I/DDR and HS200 timing for|
-; SD3.0 or eMMC4.5, regulator must be configured. the value is |
-; the ldo name of AXP221, eg: sdc_regulator = "axp22_eldo2" |
-; other: GPIO Mapping configuration |
-; ------------------------------------------------------------------------------|
-; Note: |
-; 1 if detmode=2, sdc_det's config=6 |
-; else if detmode=1, sdc_det's config=0 |
-; else sdc_det IO is not necessary |
-; 2 if the customer wants to support UHS-I and HS200 features, he must provide|
-; an independent power supply for the card. This is only used in platforms |
-; that supports SD3.0 cards and eMMC4.4+ flashes |
-;--------------------------------------------------------------------------------
-[mmc0_para]
-sdc_used = 1
-sdc_detmode = 1
-sdc_buswidth = 4
-sdc_clk = port:PF02<2><1><2><default>
-sdc_cmd = port:PF03<2><1><2><default>
-sdc_d0 = port:PF01<2><1><2><default>
-sdc_d1 = port:PF00<2><1><2><default>
-sdc_d2 = port:PF05<2><1><2><default>
-sdc_d3 = port:PF04<2><1><2><default>
-sdc_det = port:PF06<0><1><2><default>
-sdc_use_wp = 0
-sdc_wp =
-sdc_isio = 0
-sdc_regulator = "none"
-sdc_power_supply = "none"
-
-[mmc1_para]
-sdc_used = 1
-sdc_detmode = 4
-sdc_buswidth = 4
-sdc_clk = port:PG00<2><1><3><default>
-sdc_cmd = port:PG01<2><1><3><default>
-sdc_d0 = port:PG02<2><1><3><default>
-sdc_d1 = port:PG03<2><1><3><default>
-sdc_d2 = port:PG04<2><1><3><default>
-sdc_d3 = port:PG05<2><1><3><default>
-sdc_det =
-sdc_use_wp = 0
-sdc_wp =
-sdc_isio = 1
-sdc_regulator = "none"
-sdc_power_supply = "none"
-sdc_2xmode = 1
-sdc_ddrmode = 1
-
-[mmc2_para]
-sdc_used = 1
-sdc_detmode = 3
-sdc_buswidth = 8
-sdc_clk = port:PC05<3><1><2><default>
-sdc_cmd = port:PC06<3><1><2><default>
-sdc_d0 = port:PC08<3><1><2><default>
-sdc_d1 = port:PC09<3><1><2><default>
-sdc_d2 = port:PC10<3><1><2><default>
-sdc_d3 = port:PC11<3><1><2><default>
-sdc_d4 = port:PC12<3><1><2><default>
-sdc_d5 = port:PC13<3><1><2><default>
-sdc_d6 = port:PC14<3><1><2><default>
-sdc_d7 = port:PC15<3><1><2><default>
-emmc_rst = port:PC16<3><1><2><default>
-sdc_det =
-sdc_use_wp = 0
-sdc_wp =
-sdc_isio = 0
-sdc_regulator = "none"
-sdc_power_supply = "none"
-sdc_2xmode = 1
-sdc_ddrmode = 1
-
-; ------------------------------------------------------------------------------|
-; sim card configuration
-;--------------------------------------------------------------------------------
-[smc_para]
-smc_used = 0
-smc_rst = port:PA09<2><default><default><default>
-smc_vppen = port:PA20<3><default><default><default>
-smc_vppp = port:PA21<3><default><default><default>
-smc_det = port:PA10<2><default><default><default>
-smc_vccen = port:PA06<2><default><default><default>
-smc_sck = port:PA07<2><default><default><default>
-smc_sda = port:PA08<2><default><default><default>
-
-
-;--------------------------------
-; [usbc0]: Controller 0 configuration.
-; usb used: USB enable flag. Set, indicating that the system USB module is available, is set to 0, it means that the system USB is disabled.
-; usb_port_type: USB port usage. 0: device only; 1: host only; 2: OTG
-; usb_detect_type: USB port of checking. 0: not detected; 1: vbus / id checks; 2: id / dpdm check
-; usb_id_gpio: USB ID pin pin configuration. For details, please refer gpio configuration instructions.
-; usb_det_vbus_gpio: USB DET_VBUS pin pin configuration. For details, please refer gpio configuration instructions.
-; usb_drv_vbus_gpio: USB DRY_VBUS pin pin configuration. For details, please refer gpio configuration instructions.
-; usb_det_vbus_gpio: "axp_ctrl", represents axp offer
-; usb_restrict_gpio: usb limiting control pin
-; usb_restric_flag: usb limiting standard set
-;--------------------------------
-;--------------------------------
-;--- USB0控制标志
-;--------------------------------
-[usbc0]
-usb_used = 1
-usb_port_type = 1
-usb_detect_type = 0
-usb_id_gpio = port:PL06<0><1><default><default>
-usb_det_vbus_gpio = port:PL06<0><1><default><default>
-usb_drv_vbus_gpio = port:PD11<1><0><default><0>
-usb_host_init_state = 1
-usb_restrict_gpio =
-usb_restric_flag = 0
-usb_restric_voltage = 3550000
-usb_restric_capacity= 5
-usb_regulator_io = "nocare"
-usb_regulator_vol = 0
-usb_not_suspend = 0
-
-;--------------------------------
-;--- USB1控制标志
-;--------------------------------
-[usbc1]
-usb_used = 1
-usb_drv_vbus_gpio =
-usb_restrict_gpio =
-usb_host_init_state = 1
-usb_restric_flag = 0
-usb_regulator_io = "nocare"
-usb_regulator_vol = 0
-usb_not_suspend = 0
-
-;--------------------------------
-;--- USB2控制标志
-;--------------------------------
-[usbc2]
-usb_used = 1
-usb_drv_vbus_gpio =
-usb_restrict_gpio =
-usb_host_init_state = 1
-usb_restric_flag = 0
-usb_regulator_io = "nocare"
-usb_regulator_vol = 0
-usb_not_suspend = 0
-
-;--------------------------------
-;--- USB3控制标志
-;--------------------------------
-[usbc3]
-usb_used = 0
-usb_drv_vbus_gpio =
-usb_restrict_gpio =
-usb_host_init_state = 1
-usb_restric_flag = 0
-usb_regulator_io = "nocare"
-usb_regulator_vol = 0
-usb_not_suspend = 0
-
-;--------------------------------
-;--- USB Device
-;--------------------------------
-[usb_feature]
-vendor_id = 0x18D1
-mass_storage_id = 0x0001
-adb_id = 0x0002
-
-manufacturer_name = "Sinovoip"
-product_name = "Overheating device"
-serial_number = "0001"
-
-[msc_feature]
-vendor_name = "USB 2.0"
-product_name = "USB Flash Driver"
-release = 100
-luns = 3
-
-[serial_feature]
-serial_unique = 0
-
-
-;--------------------------------------------------------------------------------
-;wifi/bt/fm/gps/nfc modules configuration
-;module_num:
-; 0- none
-; 1- rtl8188eu(wifi)
-; 2- rtl8723bs(wifi+bt)
-; 3- ap6181(wifi)
-; 4- ap6210(wifi+bt)
-; 5- ap6330(wifi+bt)
-; 6- ap6335(wifi)
-; 7- rtl8189etv(wifi)
-;module_power0: axp used by module, "axp22_dldo1" - use dldo1, not use keep it empty
-;module_power0_vol: power0 voltage, mv;
-;chip_en: enable chip io
-;lpo_use_apclk: ""- not use, "losc_out"- a23/33/H3, "ac10032k1"、"ac10032k2"、"ac10032k3"- a80
-;--------------------------------------------------------------------------------
-[module_para]
-module_num = 4
-module_power0 =
-module_power0_vol = 0
-module_power1 =
-module_power1_vol = 1
-module_power2 =
-module_power2_vol =
-module_power3 =
-module_power3_vol =
-chip_en =
-lpo_use_apclk = "losc_out"
-
-;--------------------------------------------------------------------------------
-;wifi configuration
-;wifi_sdc_id: 0- SDC0, 1- SDC1, 2- SDC2, 3- SDC3
-;wifi_usbc_id: 0- USB0, 1- USB1, 2- USB2
-;wifi_usbc_type: 1- EHCI(speed 2.0), 2- OHCI(speed 1.0)
-;wl_reg_on: wifi function enable pin
-;wl_host_wake: wlan device wake-up host pin
-;wl_host_wake_invert: whether wl_host_wake use inverter between ap and module
-; 0: not used, 1: used
-;--------------------------------------------------------------------------------
-[wifi_para]
-wifi_used = 1
-wifi_sdc_id = 1
-wifi_usbc_id =
-wifi_usbc_type =
-wl_reg_on = port:PL07<1><default><default><0>
-wl_host_wake = port:PG10<0><default><default><0>
-wl_host_wake_invert = 0
-
-;--------------------------------------------------------------------------------
-;bluetooth configuration
-;bt_used: 0- no used, 1- used
-;bt_uard_id: 0- uart0, 1- uart1, 2- uart2
-;bt_uart_baud: uart baud rate, unit: bps
-;bt_rst_n: bt function enable io
-;bt_wake: host wake-up bluetooth device
-;bt_host_wake: bt device wake-up host
-;bt_host_wake_invert: whether bt_host_wake use inverter between ap and module
-; 0: not used, 1: used
-;--------------------------------------------------------------------------------
-[bt_para]
-bt_used = 1
-bt_uart_id = 1
-bt_uart_baud = 1500000
-bt_rst_n = port:PG12<1><default><default><0>
-bt_wake = port:PG13<1><default><default><0>
-bt_host_wake = port:PG11<0><default><default><0>
-bt_host_wake_invert = 0
-
-;--------------------------------------------------------------------------------
-;daudio_master:1: SND_SOC_DAIFMT_CBM_CFM(codec clk & FRM master) use
-; 2: SND_SOC_DAIFMT_CBS_CFM(codec clk slave & FRM master) not use
-; 3: SND_SOC_DAIFMT_CBM_CFS(codec clk master & frame slave) not use
-; 4: SND_SOC_DAIFMT_CBS_CFS(codec clk & FRM slave) use
-;daudio_select:0 is pcm.1 is i2s
-;audio_format: 1:SND_SOC_DAIFMT_I2S(standard i2s format). use
-; 2:SND_SOC_DAIFMT_RIGHT_J(right justfied format).
-; 3:SND_SOC_DAIFMT_LEFT_J(left justfied format)
-; 4:SND_SOC_DAIFMT_DSP_A(pcm. MSB is available on 2nd BCLK rising edge after LRC rising edge). use
-; 5:SND_SOC_DAIFMT_DSP_B(pcm. MSB is available on 1nd BCLK rising edge after LRC rising edge)
-;signal_inversion:1:SND_SOC_DAIFMT_NB_NF(normal bit clock + frame) use
-; 2:SND_SOC_DAIFMT_NB_IF(normal BCLK + inv FRM)
-; 3:SND_SOC_DAIFMT_IB_NF(invert BCLK + nor FRM) use
-; 4:SND_SOC_DAIFMT_IB_IF(invert BCLK + FRM)
-;over_sample_rate: support 128fs/192fs/256fs/384fs/512fs/768fs
-;sample_resolution :16bits/20bits/24bits
-;word_select_size :16bits/20bits/24bits/32bits
-;pcm_sync_period :16/32/64/128/256
-;msb_lsb_first :0: msb first; 1: lsb first
-;sign_extend :0: zero pending; 1: sign extend
-;slot_index :slot index: 0: the 1st slot - 3: the 4th slot
-;slot_width :8 bit width / 16 bit width
-;frame_width :0: long frame = 2 clock width; 1: short frame
-;tx_data_mode :0: 16bit linear PCM; 1: 8bit linear PCM; 2: 8bit u-law; 3: 8bit a-law
-;rx_data_mode :0: 16bit linear PCM; 1: 8bit linear PCM; 2: 8bit u-law; 3: 8bit a-law
-;--------------------------------------------------------------------------------
-[pcm0]
-daudio_used = 0
-daudio_master = 4
-daudio_select = 1
-audio_format = 1
-signal_inversion = 1
-mclk_fs = 128
-sample_resolution = 16
-slot_width_select = 32
-;pcm_sync_period = 256
-pcm_lrck_period = 32
-pcm_lrckr_period = 1
-msb_lsb_first = 0
-sign_extend = 0
-slot_index = 0
-slot_width = 32
-frame_width = 0
-tx_data_mode = 0
-rx_data_mode = 0
-i2s_mclk = port:PA18<2><1><default><default>
-i2s_bclk = port:PA19<2><1><default><default>
-i2s_dout0 = port:PA20<2><1><default><default>
-i2s_din = port:PA21<2><1><default><default>
-
-
-[pcm1]
-daudio_used = 0
-daudio_master = 4
-daudio_select = 1
-audio_format = 1
-signal_inversion = 1
-mclk_fs = 128
-sample_resolution = 16
-slot_width_select = 32
-;pcm_sync_period = 256
-pcm_lrck_period = 32
-pcm_lrckr_period = 1
-msb_lsb_first = 0
-sign_extend = 0
-slot_index = 0
-slot_width = 32
-frame_width = 0
-tx_data_mode = 0
-rx_data_mode = 0
-i2s_mclk = port:PG10<2><1><default><default>
-i2s_bclk = port:PG11<2><1><default><default>
-i2s_dout0 = port:PG12<2><1><default><default>
-i2s_din = port:PG13<2><1><default><default>
-
-
-[audio0]
-audio_used = 0
-lineout_vol = 0x1f
-cap_vol = 0x5
-audio_hp_ldo = "none"
-adcagc_used = 0
-adcdrc_used = 0
-dacdrc_used = 0
-adchpf_used = 0
-dachpf_used = 0
-audio_pa_ctrl = port:PL01<1><default><default><0>
-
-[spdif0]
-spdif_used = 0
-spdif_dout = port:PA17<2><1><default><default>
-
-[audiohub]
-hub_used = 0
-codec_used = 1
-spdif_used = 1
-hdmi_used = 1
-
-;----------------------------------------------------------------------------------
-;ir rx --- infra remote configuration
-;----------------------------------------------------------------------------------
-[s_cir0]
-ir_used = 1
-ir_rx = port:PL11<2><1><default><default>
-ir_power_key_code0 = 0x57
-ir_addr_code0 = 0x9f00
-ir_power_key_code1 = 0x1a
-ir_addr_code1 = 0xfb04
-ir_power_key_code2 = 0x14
-ir_addr_code2 = 0x7F80
-ir_power_key_code3 = 0x15
-ir_addr_code3 = 0x7F80
-ir_power_key_code4 = 0x0b
-ir_addr_code4 = 0xF708
-ir_power_key_code5 = 0x03
-ir_addr_code5 = 0x00EF
-ir_power_key_code6 = 0x9f
-ir_addr_code6 = 0x4CB3
-ir_power_key_code7 = 0x0a
-ir_addr_code7 = 0x7748
-ir_power_key_code8 = 0x45
-ir_addr_code8 = 0xbd02
-ir_power_key_code9 = 0x4d
-ir_addr_code9 = 0xde21
-ir_power_key_code10 = 0x18
-ir_addr_code10 = 0xfe01
-ir_power_key_code11 = 0x57
-ir_addr_code11 = 0xff00
-ir_power_key_code12 = 0x4d
-ir_addr_code12 = 0xff40
-ir_power_key_code13 = 0x88
-ir_addr_code13 = 0xdd22
-
-
-;----------------------------------------------------------------------------------
-;ir tx--- infra remote configuration
-;----------------------------------------------------------------------------------
-[cir]
-ir_used = 1
-ir_tx = port:PH07<2><default><default><default>
-
-
-;----------------------------------------------------------------------------------
-; dvfs voltage-frequency table configuration
-;
-; pmuic_type:0:none, 1:gpio, 2:i2c
-; pmu_gpio0: gpio config.
-; pmu_levelx: 0~9999: voltage(mV), 10000~90000:gpio0 state. voltage form high to low.
-;
-; extremity_freq(Hz): cpu extremity frequency when run benckmark or demo apk
-; 1536MHz@1500mV with radiator, 1296MHz@1340mV without radiator
-; max_freq: cpu maximum frequency, based on Hz, can not be more than 1200MHz
-; min_freq: cpu minimum frequency, based on Hz, can not be less than 60MHz
-;
-; LV_count: count of LV_freq/LV_volt, must be < 16
-;
-; LV1: core vdd is 1.50v if cpu frequency is (1296Mhz, 1536Mhz]
-; LV2: core vdd is 1.34v if cpu frequency is (1200Mhz, 1296Mhz]
-; LV3: core vdd is 1.32v if cpu frequency is (1008Mhz, 1200Mhz]
-; LV4: core vdd is 1.20v if cpu frequency is (816Mhz, 1008Mhz]
-; LV5: core vdd is 1.10v if cpu frequency is (648Mhz, 816Mhz]
-; LV6: core vdd is 1.04v if cpu frequency is (0Mhz, 648Mhz]
-; LV7: core vdd is 1.04v if cpu frequency is (0Mhz, 648Mhz]
-; LV8: core vdd is 1.04v if cpu frequency is (0Mhz, 648Mhz]
-;
-;----------------------------------------------------------------------------------
-[dvfs_table]
-pmuic_type = 0
-pmu_gpio0 = port:PL06<1><1><2><1>
-pmu_level0 = 11300
-pmu_level1 = 1100
-;extremity_freq = 1296000000
-max_freq = 1200000000
-min_freq = 648000000
-LV_count = 2
-LV1_freq = 1200000000
-LV1_volt = 1300
-LV2_freq = 648000000
-LV2_volt = 1300
-
-[gpu_dvfs_table]
-
-G_LV_count = 3
-
-G_LV0_freq = 312000000
-G_LV0_volt = 1200000
-
-G_LV1_freq = 384000000
-G_LV1_volt = 1200000
-
-G_LV2_freq = 456000000
-G_LV2_volt = 1200000
-
-;----------------------------------------------------------------------------------
-;special gpio config for Board Vendor ID
-;vid_used -- if board need distinguished by gpio,set '1';if not,set '0'
-;vid_count -- the count of vendor id bits
-;vid_bit_[0..3] -- gpio config for each bit of board vendor id
-;example: vendor id hex format :{0x 0 0 1 0 }
-; | | | |
-; [vid_bit_3] [vid_bit_2] [vid_bit_1] [vid_bit_0]
-;----------------------------------------------------------------------------------
-[board_vendor]
-vid_used = 0
-vid_count = 0
-vid_bit_0 = port:PD16<0><1><default><default>
-vid_bit_1 = port:PD15<0><1><default><default>
-vid_bit_2 = port:PD14<0><1><default><default>
-vid_bit_3 = port:PD13<0><1><default><default>
-vid_bit_4 = port:PD12<0><1><default><default>
-vid_bit_5 = port:PD17<0><1><default><default>
-
-;----------------------------------------------------------------------------------
-;virtual device
-;virtual device for pinctrl testing
-;device have pin PA1 PA2
-;----------------------------------------------------------------------------------
-[Vdevice]
-Vdevice_used = 0
-Vdevice_0 = port:PH10<5><1><2><default>
-Vdevice_1 = port:PH11<5><1><2><default>
-
-;----------------------------------------------------------------------------------
-;s_uart0 config parameters
-;s_uart_used --s_uart0 whether used for arisc debugging
-;----------------------------------------------------------------------------------
-[s_uart0]
-s_uart_used = 0
-s_uart_tx = port:PL02<2><default><default><default>
-s_uart_rx = port:PL03<2><default><default><default>
-
-;----------------------------------------------------------------------------------
-;s_rsb0 config parameters
-;s_rsb_used --s_rsb0 whether used for arisc
-;----------------------------------------------------------------------------------
-[s_rsb0]
-s_rsb_used = 1
-s_rsb_sck = port:PL00<2><1><2><default>
-s_rsb_sda = port:PL01<2><1><2><default>
-
-;----------------------------------------------------------------------------------
-;s_jtag0 config parameters
-;s_jtag0_used --s_jtag0 whether used for arisc
-;
-;----------------------------------------------------------------------------------
-[s_jtag0]
-s_jtag_used = 0
-s_jtag_tms = port:PL04<2><1><2><default>
-s_jtag_tck = port:PL05<2><1><2><default>
-s_jtag_tdo = port:PL06<2><1><2><default>
-s_jtag_tdi = port:PL07<2><1><2><default>
-
-;----------------------------------------------------------------------------------
-;s_powchk cpus power check
-;s_powchk_used --power check whether used for arisc in super standby
-; bit31:enable power updat, bit1:wakeup when power state exception
-; bit0:wakeup when power consumption exception
-;s_power_reg the expected regs stand for power on/off state
-;s_system_power the limit maxmum power consumption when super standby (unit: mw)
-;
-;----------------------------------------------------------------------------------
-[s_powchk]
-s_powchk_used = 0x80000000
-s_power_reg = 0x00000000
-s_system_power = 50
-
-;----------------------------------------------------------------------------------
-;scr configuration
-;----------------------------------------------------------------------------------
-[sim0]
-scr_used = 0
-scr_vccen = port:PA06<2><default><default><default>
-scr_slk = port:PA07<2><default><default><default>
-scr_sda = port:PA08<2><default><default><default>
-scr_rst = port:PA09<2><default><default><default>
-scr_det = port:PA10<2><default><default><default>
-
-
-;--------------------------------------------------------------------------------
-;tsc configuration
-;--------------------------------------------------------------------------------
-[ts0]
-tsc_used = 0
-tsc_clk = port:PE00<3><default><default><default>
-tsc_err = port:PE01<3><default><default><default>
-tsc_sync = port:PE02<3><default><default><default>
-tsc_dvld = port:PE03<3><default><default><default>
-tsc_d0 = port:PE04<3><default><default><default>
-tsc_d1 = port:PE05<3><default><default><default>
-tsc_d2 = port:PE06<3><default><default><default>
-tsc_d3 = port:PE07<3><default><default><default>
-tsc_d4 = port:PE08<3><default><default><default>
-tsc_d5 = port:PE09<3><default><default><default>
-tsc_d6 = port:PE10<3><default><default><default>
-tsc_d7 = port:PE11<3><default><default><default>
-
-;--------------------------------------------------------------------------------
-;gpio key
-;--------------------------------------------------------------------------------
-[gpio_power_key]
-key_used = 1
-key_io = port:PL03<6><default><default><0>
-
-;----------------------------------------------------------------------------------
-; key para
-;
-; key_used --0:not used, 1:used
-; key_cnt --how many key button attach to keyadc.
-; key*_vol --the threshold of input voltage of key.
-;
-; For example: if key2_vol < $(keyadc value) < key3_vol, then key3 be reported.
-;----------------------------------------------------------------------------------
-[key_para]
-key_used = 0
-key_cnt = 5
-key1_vol = 222
-key2_vol = 444
-key3_vol = 666
-key4_vol = 857
-key5_vol = 2000
-
-;----------------------------------------------------------------------------------
-;display seven segment para
-;----------------------------------------------------------------------------------
-[d7s_para]
-d7s_used = 0
-din_gpio = port:PD00<1><default><default><1>
-clk_gpio = port:PD01<1><default><default><1>
-stb_gpio = port:PD02<1><default><default><1>
-
-;----------------------------------------------------------------------------------
-;mali parameters
-;----------------------------------------------------------------------------------
-[mali_para]
-mali_used = 1
-mali_clkdiv = 1
-mali_extreme_freq = 600
-mali_extreme_vol = 1400
-
-;----------------------------------------------------------------------------------
-; 1wire parameters (since pin 37 is not a GPIO but SPDIF instead please choose
-; any of the GPIO pins defined above and please don't forget to delete this pin
-; from the gpio list to get 1-wire working. PA10 on physical pin 35 is prepared
-; below but to work it needs 'w1_used = 1'
-;----------------------------------------------------------------------------------
-[w1_para]
-w1_used = 0
-gpio = 10
-
-[corekeeper]
-corekeeper_enabled = 1
diff --git a/extra/m2plus/uboot_defconfig b/extra/m2plus/uboot_defconfig
@@ -1,17 +0,0 @@
-CONFIG_ARM=y
-CONFIG_ARCH_SUNXI=y
-CONFIG_MACH_SUN8I_H3=y
-CONFIG_DRAM_CLK=672
-CONFIG_DRAM_ZQ=3881979
-CONFIG_DRAM_ODT_EN=y
-# CONFIG_VIDEO is not set
-CONFIG_DEFAULT_DEVICE_TREE="sun8i-h3-bananapi-m2-plus"
-# CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
-CONFIG_SPL=y
-# CONFIG_CMD_IMLS is not set
-# CONFIG_CMD_FLASH is not set
-# CONFIG_CMD_FPGA is not set
-CONFIG_CMD_GPIO=y
-CONFIG_USB_EHCI_HCD=y
-CONFIG_DM=y
-CONFIG_DM_GPIO=y
diff --git a/init.sh b/init.sh
@@ -32,7 +32,7 @@ else
printf "(!!) this distro is unsupported. check and install the dependencies manually\n"
fi
-git submodule update --init --recursive
+git submodule update --init --recursive --checkout
mkdir -p gcc
#cd lib/libdevuansdk && git checkout next && cd -
